Like Dante’s Stone in Florence, this is a stone of inspiration. If you have walked around the south side of the Duomo, chances are that you have passed Dante’s stone without even noticing it. But not so with this stone. When you walk into a room that has this stone you cannot help but gravitate towards it. So the next time you come across this stone, pause for a moment and find your inspiration here.
  • Stain resistant
  • Scratch resistant
  • Chemical resistant
  • Heat resistant
  • Impact resistant
  • Flexible
  • Very thin and lightweight
  • Non-absorbant


Product Feature

Up to 72% post consumer recycled content

With an incredible colour palette and content made from up to 72% post-consumer recycled materials, Earthstone is an ideal option for both commercial and residential floors, walls and countertops.

Get a Free Quote Now

Bringing back a timeless look without the timeframe of a typical installation. No inconvenience. No complications.

Our tile can be used on top of an existing floor or other surfaces, saving you time and money. This tiles is produced in slabs of 120″ x 51″ which enables covering large areas with relatively few joints. The lightness of the material, combined with its outstanding technical properties, allows for a variety of uses, especially in high traffic commercial areas. It is an ideal solution in those environments where a lightweight, durable surface is needed such as apartments and partition walls.

It is easy to cut on site, using the correct diamond cutting disc and is sufficiently flexible to attain a radius of more than 27.5″, making it suitable for cladding curved surfaces. The tiles slim dimensions enable it to be used on top of existing surface materials.

Specification Typical
Slab size nominal 3050 x 1300 x 6.5mm
Slab thickness tolerance +/- 0.70mm
Slab flatness +/- 1mm width | +/- 2mm length
Gloss 56
Slab weight 58kg
Property Test Method Typical Value
Specific Gravity ASTM D792 2.40
Hardness MOHS 7.6
Water Absorption AS 1756-1989 (AS-3558.1) 0.03%
Colour Fastness AS 1756-1989 (AS-3558.3) No Change
Impact Resistance AS 1756-1989 (AS-3558.15) No Cracks or Grazing
Impact Resistance EAN1467.9 3.30j Unsupported 6.1j Supported
Izod Impact Resistance ASTM D256 2.23ft.lbf
Flexural Strength ASTM D790 47Mpa
Resistance to Surface Scratching AS 1756-1989 (AS-3558.4) Unaffected
Resistance to Surface Scratching AS/NZS 2924.2.14 6.5N
Wear Index ASTM D4060 0.58mg/cycle
Heat Resistance NEMA D2863 No Change
Steam Resistance AS/NZS 2924.2.23 No Change
Boiling Water Surface NEMA LD-3 No Change
Stain Resistance AS 1756-1989 (AS-3558.42 Pass. Any superficial stains were removed by water, undiluted bleach or Jiff.
Slip Resistance AS/NZS 4586 Dry Class F (Medium)
Slip Resistance AS/NZS 4586 Wet 21
Thermal Shock ASTM C484 No cracks or crazing
Heat Release AS/NZS 3837 Total Heat Released 50.1 MJ/kg
Average Specific Extinction Area AS/NZS 3837 153.1 m2/kg
Critical Heat Flux ASISO 9239.1 4
Early Fire Hazard Ignitability Index AS1530.3 0-20 4
Early Fire Hazard Spread of Flame Index AS1530.3 0-10 0
Early Fire Hazard Heat Evolved Index AS1530.3 0-10 2
Early Fire Hazard Smoke Developed Index AS1530.3 0-10 2

The only limit to creating superb designs is the imagination.

Update your existing benchtop surface with minimal fuss. Our unique system is both time and cost efficient.

  • Stain resistant

  • Scratch resistant

  • Chemical resistant

  • Heat resistant

  • Impact resistant

  • Flexible

  • Very thin and lightweight

  • Non-absorbant

Get a Free Quote Now


Go to Top